2G Eagle Talon 10.5" Pro Race Intercooler Kit

Detailed Description:

2G Eagle Talon 10.5" Pro Race Intercooler Kit

The ETS 2G Eagle Talon 10.5" Pro Race Intercooler Kit is an all out effort providing track driven vehicles with the best Intercooler System Available. This kit will require excessive nose trimming due to the 3.5” thickness. With a Bar and Plate Core, Mandrel bent Piping, Stainless T-Bolt Clamps, 3 Layer Silicone, Full Instructions, this kit is one tough contender. At the heart of the kit is our Premium Bar and Plate core. These high flowing cores feature our exclusive offset and staggered internal fins, and louvered external fins. This dense fin design allows our cores to be some of the most efficient units available while still retaining good flow, both on the charge air (Internal) side, and the ambient (external) side. This will ensure there is little pressure drop across the Intercooler, and the radiator will stay cool.

To complement such a core, our 2G piping has been designed with the shortest, smoothest, and easiest to install routing possible. Our unique design routes the piping around the core support and up over the shift linkage, this means that there is 3 ft. less piping than kits that follow the stock pipe routing. Our piping comes off the turbo and expands up to a large 2.5” diameter as soon as possible. From there it stays 2.5” all the way to the throttle body elbow. Our piping is also modular, so all it takes to go from a T25 to a 16g is one pipe, or from a 16g to a t3/t4 is one pipe as well. This means that if you buy the kit and upgrade later, you will not be throwing away your money. Also a unique feature to our kit is that both stock fans stay with all of the turbo options. Our trademark “J” Pipe will route between the fans , while the t3/ t4 piping will clear the cross member—that so many other kits have problems with. The T25 kit will require very slight cutting of the fan motor mount. The kit can also be configured for a GM MAS Translator if need be. In this situation we leave a 6” gap for the GM MAS, and the BOV (Blow off Valve) gets moved down by the overflow tank so it can vent to the atmosphere without stalling. If you are using the stock 2G MAS, then the BOV will be up by the cruise control for easy recirculation with the stock tube. All of our piping features wrinkle free Mandrel Bends, a durable powder coat finish, Stainless Steel T-Bolt Clamps (you can tighten them with an Impact Gun!!), and Premium Silicone Couplers.

The Installation of the ETS 2G Eagle Talon 10.5" Pro Race Intercooler Kit is the easiest there is. Cutting the bumper apart, Hole Sawing the core support, removing fans, and cutting motor mounts are a thing of the past. Our detailed instructions will walk you through all the difficult steps of the install. The install is easiest on 97-99 Eclipses, as on these years there is very little nose trimming, and the fog lights stay. On all Talons, and 95-96 Eclipses the fog lights get removed and on the 95-96 Eclipses the grill area gets trimmed back. All of this has to be done with any FMIC kit , our instructions will guide you through the install with ease.

Extreme Turbo Systems
2219 NE 339th St
La Center, WA. 98629
Phone: 360-263-3748
email: sales@extremeturbosystems.com

Copyright 2006 Extreme Turbo Systems
2G Eagle Talon 10.5" Pro Race Intercooler Kit